User Instructions

When launched, the Sensotrend Uploader will open a login page for you if you are not already logged in to our service.

Enter the email address that serves as your username and the password for Sensotrend services (1) and then press the “Log in” button (2). If you select “Remember me” (3) on this page, you will be logged in automatically in the future.

On first use, the Sensotrend Uploader will ask you to select the devices you are using.

Select "Medtronic 630G, 640G, 670G" from the list (1) and press the “Done” button (2).

The Sensotrend Uploader application window should look like this.

To upload your data, connect Contour Next Link 2.4 glucometer into a USB port on your computer, and then do the following.

Option A: Your insulin pump is NOT CONNECTED to Contour Next Link 2.4 glucometer. Make sure the “Meter and Pump Connected” option is not selected (1), and then enter the serial number on the back of your insulin pump in the “Pump Serial Number” box (2). Select the desired data transfer period (3) and press the “Upload” button (4).

Option B: Your insulin pump is CONNECTED to the Contour Next Link 2.4 glucometer. Make sure the “Meter and pump connected” option is selected (1), select the desired data transfer period (2) and press the “Send” button (3).

After starting the data transfer, the “Upload” button will be replaced by a message (1) indicating the progress of the data transfer.

When the upload is complete, the Sensotrend Uploader application window will look like this.

The data has now been uploaded successfully. Transferring a large amount of data takes a while, so in some cases the data sent to it will not appear for half an hour. Once the data has been transferred, you can view it by clicking the “See data” button (1).