User Instructions

When launched, the Sensotrend Uploader will open a login page for you if you are not already logged in to our service.

Enter the email address that serves as your username and the password for Sensotrend services (1) and then press the “Log in” button (2). If you select “Remember me” (3) on this page, you will be logged in automatically in the future.

On first use, the Sensotrend Uploader will ask you to select the devices you are using.

Select "CareSens N Premier & Dual (Using Bluetooth)" from the list (1) and press the “Done” button (2).

The Sensotrend Uploader application window should look like this.

1. Hold down the S button on the glucometer until “SET” appears on the display.

2. Press the right arrow button to select “YES” and press the S button.

3. Press the right arrow key until bT PAIr appears on the display.

4. Press the S button - the display should read “PIn”.

5. Press the “Upload” button (1) in the Sensotrend Uploader.

6. Enter the PIN code displayed on the meter and press “OK”.

After starting the data transfer, the “Upload” button will be replaced by a message (1) indicating the progress of the data transfer.

When the upload is complete, the Sensotrend Uploader application window will look like this.

The data has now been uploaded successfully. Transferring a large amount of data takes a while, so in some cases the data sent to it will not appear for half an hour. Once the data has been transferred, you can view it by clicking the “See data” button (1).